FILM OILS
LUBOL  FILMEX

These are low viscosity index mineral oils having good adhesiveness and film strength, inherent oxidation and thermal stability, resistance to corrosion besides excellent ability to separate from water. They maintain thin film of oil under light and medium loads, protect machinery from excessive wear and provide economical lubrication.

 

APPLICATION :
LUBOL Filmex oils are recommended for non-critical all loss lubrication system, hand-oiling applications involving lubrication of bearings, open gears, lightly loaded slides and guide ways of machine tools. These oils are preferable to be used in circulation systems where additive treated oils are not required viz. filter media in oil bath type air cleaners, fluid sealing medium for gas holder where the gases don’t react with mineral oils and flushing of automotive & industrial equipment so as to clean their all-inaccessible internal surfaces.
 
MEETS PERFORMANCE STANDERD :
IPSS 1-09-001-81
IS:6552-1972 Grade 1 & 2 Type.
 
 
SPECIFICATION :

LUBOL GRADE

K.V. cSt @ 40 °C

VISCOSITY @100C

VISCOSITY INDEX FLASH POINT COC, 0C POUR POINT0C

Flexin  15

14.4

3.05

92 168 - 6

Flexin  22

22.8

4.54

95 172 - 6

Flexin 32

32.5 5.50 95 182 - 6

Flexin 46

47 7.2 95 190 - 6
Flexin 68 66.98 8.68 90 214 - 6
Flexin 100 90.00 11.10 90 240 - 6
Flexin 150 152.20 14.78 98 240 - 6
Flexin 220 224.00 18.52 91 250 - 6
Flexin 460 28.8 28.8 90 270 - 6
 
PRECAUTION:
Health : This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.

Environment : Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING : 210 liters Drums