| |
| LUBOL METDRAW OILS |
| |
| WIRE DRAWING OILS |
| These products are stable, non-staining, highly refined mineral oil based lubricant,possessing good cooling abilities. They are specially developed for high speed and deep drawing application of metals. They provide good metal wetting characteristics and optimum film strength. |
| |
|
|
|
|
METDRAW 20 |
| This is a stable non refined oil blended with fatty oil ie. The mixture of soap and fat to improve wetting characteristics. It is non-staining, mineral oil based lubricant specially recommended Alumuniam wire drawing operations. |
METDRAW 32 |
| Metdraw 32 is blended by using high perforamnce base oils and fortifed with a combination of Anti Wear and Extreme Pressure Additives to sustain higher loads during the drawing operations. This oil is most suitable for use as a coolent in wire/tube dawing of steel This oil also provides a stable oil film between the metal surface and prevents the metails from breakages. |
| METDRAW EP 42 |
| This is a special grade in which special additives ie. chlorinated extreme pressure (EP) type, is blended with fatty oils and free sulphur making it ideally suited for most severe drawing conditions of ferrous and non ferrous metals. It offers high degree of finish of the tube bar both internally and externally. It is widely used for deep drawing and cold rolling of Stainless Steel tubes. It also has a good corrision protection charactersistics.These oils are also useful in deep drawing of automotive bodies and metal sheets. |
|
 |
|
| |
| SPECIFICATION : |
Product |
Appearance |
K.V. cSt @ 40 °C |
K.V. cSt @ 100 °C |
Saponification
Value |
Flash Point
PMCC. °C |
Copper Strip Corrosion, @100ºC, max. |
Timken OK Load, 1bs min. |
METDRAW 20 |
Dark |
280-300 |
22-25 |
20 - 24 |
255 |
1 (3Hr.) |
- |
| METDRAW 32 |
Dark |
285-305 |
21-24 |
25-29 |
260 |
1(3hr.) |
42 |
| METDRAW EP 42 |
Dark |
470-490 |
31-32 |
- |
150 |
4(1hr) |
- |
|
|
|
|
|
|
|
